Well Management
Well Disclosure/Property Transfer
Providing Important Information About Wells on Your Property
On this page:
What is well disclosure?
Why
is well disclosure important?
Is the seller liable for false disclosure?
When and how do I disclose wells on my property?
Is a well disclosure certificate needed if one was
filed for a previous transfer of the property?
What if there are no wells on my property?
How do I know if there is a well on the property?
What if a well is not in use?
What is well sealing?
What is a maintenance permit?
Where can I get more information or help?
Well disclosure is the process by which the seller of property provides
information to the buyer and the state about the location and status
of all wells on the property. This process is required by state law,
a portion of the Ground Water Protection Act (Minnesota Statutes, section 103I.235).
The law applies to all types of wells, including wells used for drinking
water, irrigation, livestock, commercial or industrial processing, heating
or cooling, or monitoring. These wells include drive-point (sand-point)
wells, drilled wells, and dug wells.
Go to > top.
Well disclosure gives valuable information to the property buyer about
the location and status of wells - including unused or "abandoned" wells
- on property that is sold or transferred. Unused wells provide a pathway
through which contaminants at the ground surface may move down to the
groundwater and contaminate nearby wells. Groundwater provides drinking
water to three out of four residents in Minnesota and must be protected
from contamination. Identifying and sealing unused wells is one important
way to protect this valuable resource.
Go to > top.
Yes. A seller is liable to the buyer for reasonable attorney fees and
costs related to sealing of the well if the seller knew or had reason
to know but failed to disclose the existence or known status of a well
at the time of sale. The buyer has six years after the purchase of the
property to bring action against the seller (Minnesota Statutes, section 103I.235).
Go to > top.
Before signing an agreement to sell or transfer real property the seller
must disclose in writing to the buyer information about the status and
location of all known wells on the property. This requirement also applies
to contract-for-deed sales. Included in the WELL DISCLOSURE STATEMENT
are:
1. the legal description and county;
2. a map showing the location of each well; and
3. whether each well is in use, not in use, or sealed.
A well is "in use" if the well is functioning for some purpose. A well
is "not in use" if the well is not functioning or is not capable of functioning,
such as when the well pump on the well is disconnected, or when the well
is no longer connected to a power supply. A well is "sealed" if the well
has been filled with an approved sealing material by a licensed well
contractor or a licensed well sealing contractor and the Minnesota Department
of Health (MDH) has received a Well and Boring Sealing Record.
At the time of closing of the sale, the information on the well disclosure
statement, the name and mailing address of the buyer, and the quarter,
section, township, and range OR lot, block, and addition name of the property must be provided on a WELL
DISCLOSURE CERTIFICATE (PDF: 69KB/3 pages). This form is also available
from many realtors, county recorders, or district offices of the MDH.
The seller or person authorized to act on behalf of the seller signs
the certificate. In the absence of the seller's signature, the certificate
is prepared and signed by the buyer or person authorized to act on behalf
of the buyer.
In the case of a contract-for-deed sale, the certificate is prepared
and signed by the seller (grantor) or person authorized to act on behalf
of the seller (grantor), when the contract is recorded at the beginning
of the contract. When the contract is recorded at the fulfillment of
the contract, the certificate is prepared and signed by the buyer (grantee)
or person authorized to act on behalf of the buyer (grantee).
When the deed is recorded with the county recorder or registrar of
titles, the buyer must provide the Well Disclosure Certificate along
with a $45 fee. Contact the MDH for proper procedures for the disclosure
of well(s) at the time of the sale of condominiums or state-leased land.
Go to > top.
A new disclosure certificate is not required if the number and status
of the wells has not changed since the last certificate was filed. However,
the following statement must be included on the deed to comply with the
certification requirement: "I am familiar with the property described
in this instrument and I certify that the status and number of wells
on the described real property have not changed since the last previously
filed well disclosure certificate." This statement must be followed
by the signature of the seller or buyer, or person authorized to act
on behalf of the seller or buyer.
Go to > top.
A well disclosure certificate is not required if there are no wells
on the property. Before signing an agreement to sell or transfer real
property, the seller must deliver a statement to the buyer that the seller
does not know of any wells on the property. The deed must contain the
statement: "The seller certifies that the seller does not know of
any wells on the described real property." For a fulfillment of the contract-for-deed
sale "grantee" is used instead of "seller" and it is followed by the
signature of the grantee. This statement must be followed by the signature of the seller or buyer, or person authorized to act on behalf of the seller or buyer. For a contract-for-deed sale "grantee" is used instead of "seller" and it is followed by the signature of the grantee.
Go to > top.
A well usually appears as a pipe or casing from 1-1/4 to 6 inches in
diameter, but may be a ring of concrete or tile up to 3 feet in diameter.
The pipe may be sticking out of the ground or in a pit. A well inside
a house often can be found by looking in the basement for a pipe that
is sticking up from the floor. This pipe may be in a utility room or
a small room adjacent to the basement. A glass block in a porch step
often indicates the location of a well, which is directly beneath the
block. Many older wells were buried. Pipes sticking out of a wall in
the basement may lead to a buried well. The previous owner or a neighbor
may have knowledge of the location of a well.
In cities and towns, homes constructed prior to the installation of
city water services usually have one or more wells, which are often unused
and unsealed. Houses that are not connected to a city water system usually
have one or more wells on the property. The city hall usually has information
about when the house was built, when city water was installed, and may
have information about the well itself.
In rural areas, farmsteads may have additional wells located in, or
adjacent to, outbuildings or livestock areas. Lake cabins usually have
wells as a source of water. A licensed well contractor can provide assistance
in locating wells. For further information, see the Finding
Lost Wells check list.
Go to > top.
If a well is not in use, the property owner has three options:
- the well can be put back into use;
- the well can be sealed by a licensed well contractor, or a licensed
well sealing contractor; or
- the property owner can apply for a maintenance permit.
If one of these steps has not been taken at the time of property transfer,
it will be the responsibility of the buyer to choose an option and follow
through with it.
Go to > top.
Well sealing is the process of permanently and completely filling a
well with an approved sealing material, called "grout." State law requires
that a well must be sealed by a licensed well contractor or a licensed
well sealing contractor (Minnesota Statutes, section 103I.301). The sealing
process starts with removal of the pump, the inner pipe to the pump,
and any materials or obstructions in the well. A grout "tremie" pipe
is then installed to the bottom of the well and the contractor pumps
in the grout, usually consisting of a special cement or a slurry of a special clay and water.
In certain cases, the contractor may have to remove or perforate the
well casing(s) before pumping the grout to assure a proper sealing. After
sealing the well, the contractor sends a "Well and Boring Sealing Record" to
the MDH and well owner.
The owner of a well is not liable for contamination of groundwater
from a well that occurs after the well has been sealed by a licensed
well contractor or a licensed well sealing contractor. For this reason,
many financial institutions and realty companies are requiring the sealing
of wells that are not in use as a condition for loans and mortgages.
The sealing of wells helps protect groundwater and the safety of your
drinking water.
If a well appears to be sealed, but a sealing record cannot be found,
a licensed well contractor or a licensed well sealing contractor needs
to inspect the well and verify whether it has been properly sealed. This
procedure may involve drilling into the well to verify the integrity
of the sealing material and to assure that the well was not simply plugged
at the top. If the well was not properly sealed, it must be cleaned out
and sealed. For further information on sealing a well, see Sealing
Unused Wells, Well Sealing Cost-Share
Availability, Low-Interest Loans and Grants
Available for Well Construction, Repair, or Sealing.
Go to > top.
A maintenance permit allows an unused well to remain unsealed if it
is properly maintained. State law requires that a well that is not in
use must be sealed unless the property owner has a maintenance permit
for the well (Minnesota Statutes, section 103I.301).
The permit is not transferable and requires a yearly fee of $175. The
property owner does not have to apply for a maintenance permit if the
well is put back into use or if the well is sealed by a licensed contractor
or a licensed well sealing contractor. A maintenance permit will not
be approved by the MDH if the well is contaminated; if the well is improperly
sealed, or; if the well is located, constructed, or maintained in a manner
that is a safety or health hazard. Local governments (usually counties) with state-delegated well programs may
have additional requirements for maintenance permits and should be asked about any additional requirements.
Go to > top.
If you have any questions regarding Well Disclosure, contact the Minnesota Department of Health, Well Management Section Central Office at health.welldisclosures@state.mn.us or at 651-201-4600 or 800-383-9808. Deaf and hard-of-hearing: TTY 651-201-5797.
|
